How To Care For Your Brita® Product
All of our products are built to last a long time. With a little care and attention along the way you can help ensure your Brita® product lives up to its full potential. We’ve also included details on when to replace your filter, how to read your filter change indicators, and details about your product warranty.
Learn more about:
- Soaking & Flushing Filters
- Replacing Your Filter
- Attaching Your Brita ® Faucet Filtration System
- Setting Up Your Indicator
- Reading Your Indicator
For pitchers, you should soak your filter before inserting it:
- Wash hands with soap and water, then remove filter from filter bag.
- Soak the filter upright in cold water for 15 minutes.
- Hold filter upright under cold, running tap water for a few seconds.
Faucet filters don’t require soaking, however, the system does need to be flushed for five minutes to activate the filter media and remove any carbon dust. The 378-litre filter life begins AFTER flushing for five minutes so you are not wasting filter life by the flushing process.
Bottle filters don’t require soaking. Squeeze one full bottle of water through the filter before use to activate. It’s normal for black carbon dust to appear.
Brita ® Pitchers and Dispensers are very low maintenance when it comes to upkeep and care. You can simply hand wash the lid and reservoir with a mild detergent.
If you have a Brita ® Chrome Pitcher lid, wipe with a soft sponge soaked in a solution of one teaspoon of white vinegar in a cup of water.
Brita ® Bottle: The bottle, the small push-pull cap, large screw-on cap and the finger loop are dishwasher safe (top shelf only). Or like pitchers and dispensers, you can hand wash the Brita ® bottle with a mild detergent.
Pitcher filters should be kept in the sealed Brita ® bag and stored in a cool, dry place until you’re ready to use them. Remember to soak the filter for 15 minutes prior to using.
If your Brita ® Faucet Filter has not been used for several days, you should let water run through the filter for 30 seconds before use, in order to wet and reactivate the system’s filter.
For your Brita ® bottle, squeeze one full bottle of water through the filter before use to activate. It’s normal for black carbon dust to appear
Things to avoid
- Hot water : Don’t filter water that is over 38°C/100°F. Hot water may release some contaminants that could be found in your tap water. Also, running hot water through the unit can severely diminish the system’s filtration abilities. If this happens, you should replace your Brita ® faucet filter to ensure you enjoy all of the benefits of Brita filtration.
- Well water : Don’t use water filtration systems with well water that isn’t regularly tested to be microbiologically safe. This filter is intended to be used only with municipally treated tap water or well water that is regularly tested.
For optimum performance, it’s important to change your Brita® filter on a regular basis. Fortunately, Brita® replacement filters are inexpensive.
Pitchers and Dispensers: Replace filters every 151 litres or every two months for the average family.
Basic Brita® Faucet Filtration System: Replace filters every 378 litres.
Complete Chrome Faucet Filtration System: Replace filters every 378 litres or every four months, whichever comes first.
Brita® Bottles: Replace filter every 256 servings, 151 litres or roughly every two months. Brita sells filters in grocery, drug, discount, specialty, hardware and warehouse club stores. To find a local retailer, please visit our Where To Buy page.
Determine if your faucet has threads on the outside or inside. If on the outside, you probably do not need to use an adapter. The base system can most likely be attached directly to the faucet (consult your Users’ Guide). Pick up the base unit, align with the faucet threads and carefully attempt to connect the system to the faucet. If the threads are on the outside, but you can’t get the collar onto the faucet, you may need a special adapter. To receive a special adapter free of charge, call 1-800-387-6940.
If the faucet has inside threads, try using one of the two adapters that come with the system, and attach the base system to the adapter. If neither one of the adapters provided will attach to the faucet, you may need a special adapter. To receive a special adapter free of charge, call 1-800-387-6940.
Setting up an Electronic Filter Change Indicator (Complete Pitchers only)
- If you’ve purchased one of our Brita® Smart Pitchers, the electronic indicator will tell you when to change your filter. To get the indicator light working, follow these easy steps:
- Press firmly and hold start button for 5 to 10 seconds.
- Four bars will appear in the display, one after the other, and flash.
- Do not release the start button until the 4 bars appear and start to flash. If you have difficulty pressing the start button, a capped ballpoint pen may be used to press the button down.
- A small flashing dot in the lower right corner shows the indicator is working.
- Every 2 weeks a bar automatically disappears. When only 1 bar remains make sure you have a new filter on hand.
- After 2 months, when all bars have disappeared, an arrow will flash at the top of the display reminding you to change your filter.
Setting up Calendar Minder ® (Space Saver only)
The Calendar Minder ® is a simple dial calendar with the month and date to remind you when to replace your filter. Use it to make remembering easier.
- Insert a new filter.
- Set filter indicator to closest date 2 months from now.
On the date indicated, remove your filter and repeat steps 1 and 2.
Basic Brita® & Complete Chrome Faucet Filtration Systems:
- Green: Your filter is working.
- Half Red and Green: Replace filter soon. Your filter cartridge has two weeks or approximately 75 litres of life left.
- Red: Your filter cartridge has reached the end of its life and needs to be replaced now.
Complete White Faucet Filtration System:
- Flashing Green: Filter is working.
- Flashing Amber: Replace filter soon.
- Flashing Red: Replace filter now.