PRODUCT SUPPORT
How to set up your water filter faucet mount
STEP ONE
Remove aerator
Easy to install. No tools required.
Remove aerator from faucet.
STEP TWO
Check for adapter needs
Check threading to determine if an adapter is needed.
Inside: Use an adapter.
Outside: Likely no adapter needed.
STEP THREE
Optional: Install washer and adapter
If needed, install washer and adapter.
You may need to experiment with different pairings to see what works.
STEP FOUR
Mount the base system
Screw base system to faucet. No tools required.
STEP FIVE
Attach filter
Support the base and click filter into filter cup.
STEP SIX
Switch settings
Turn to Brita® filtered water setting and flush with cold water for 5 minutes.
STEP SEVEN
Filter replacement indicator
The Filter Replacement Indicator monitors the filter life and tells you when to replace the filter cartridge based on average water quality and filtered water usage by the average family. The Filter Replacement Indicator will signal the need for replacement after approximately 100 gallons/378 liters.
Solid Green: No change needed.
Green and Red: Filter has approximately 20 gallons of life left.
Solid Red: Time to change filter.
STEP EIGHT
1-click filter replacement
Press the release button to pull out the filter. Insert the new filter into the base. Flush 5 minutes (Tip: Use this water to water your plants!)
